Gå vidare till produktinformation
1 av 10

GOCPB

GOCPB Electric Water Pump 11518635089 Head Alloy Steel Car Coolant Pump Replacement for 3 Series 5 Series 7 Series X3 X5 X6(N20)

GOCPB Electric Water Pump 11518635089 Head Alloy Steel Car Coolant Pump Replacement for 3 Series 5 Series 7 Series X3 X5 X6(N20)

Ordinarie pris $176.99 USD
Ordinarie pris $174.98 USD Försäljningspris $176.99 USD
Rea Slutsåld
Color

About this item

  • 🚘【Replace OE Numbers】Replaces the OE Number: N20B20A, N20B20B, N26B20A, N20B20D, 11517604027, 11518635089. Before ordering, please confirm whether the accessories are suitable for your vehicle. Note: Square insert short leg
  • 🚘【Application】Electric Coolant Engine Water Pump Compatible with BMW Sedan 1er 2er 3er 4er 5er F20 F10 F87 F35 SUV X1 X3 X4 E84 F25 F26 Replaces with N20 flat plug
  • 🚘【Quality Advantages】Motor: 1.7MM, 180 ° C copper wire, rotor: permanent magnet neodymium iron boron, strong performance, cover stainless steel, magnetic steel is OE same material, same energy, same specification, controller: 4 layers of the most advanced PCB; Full patch; High efficiency and adjustable heat dissipation,
  • 🚘【High-Quality Materials】High-strength aluminum provides great abrasion resistance and stability. The aluminum housing is precisely machined to achieve proper sealing and can achieve excellent protection against leakage.
  • 🚘【Warranty】12-Months-Warranty from the date of purchase.Carefully read the list and make sure the part is compatible. If you are not sure, please contact us. We will answer you within 24 hours.

Product Description


GOCPB provides Engine and Cooling system accessories, among which the widely used Electronic Water Pump combines the advantages of self-priming pump and chemical pump. It is made of a variety of corrosion-resistant imported materials and has the properties of acid resistance, alkali resistance, corrosion resistance, etc; The self suction speed is extremely fast (about 1 second), the suction force is strong, and there is basically no noise. Exquisite workmanship, not only self-priming function, but also large flow (up to 25L/min), high pressure (up to 2.7kg), stable performance and Easy to Install.

5

Application

Compatible with 2008-2011 BMW 128i

Compatible with 2007-2011 BMW 323i

Compatible with 2007-2012 BMW 328i

Compatible with 2006 BMW 325i 325xi 330i 330xi

Compatible with 2009-2011 BMW 328i xDrive

Compatible with 2007-2008 BMW 328xi 2008-2010 BMW 528i

Compatible with 2006-2007 BMW 525i 525xi 530i 530xi

Compatible with 2009-2010 BMW 528i xDrive 2008 BMW 528xi

Compatible with 2007-2010 BMW X3 X5x

Compatible with 2006-2011 BMW Z4

2

Fitment Information:

1、 Inspection before installation

Before installation, gently move the impeller by hand and rotate it for more than three times.

Check the harness plug for aging and poor contact. If the on-board harness plug needs to be replaced, please use the plug that meets the technical specifications of the original vehicle, and do not change the original harness definition

Note: The water pump cannot be dry friction, and it must not be powered on for dry operation without cooling and lubrication.

2、 Inspection after installation

Check whether there is coolant leakage at the interface.

Confirm that the plug buckle has been fastened.

Check whether the battery voltage is low.

Clear the fault code, run the engine for 15-20 minutes and observe whether the coolant temperature is normal and whether there is a high temperature alarm.

If the fault code "electronic water pump missing/missing" is reported during the initial installation, check the harness and plug for damage or poor contact.

Product information

Technical Details

Visa alla uppgifter