About this item

• 🚘【Replace OE Numbers】Replaces the OE Number: 11538648791 11538635689 11537633476 11537588257 11537633477 11538636594 11538636595. Before ordering, please confirm whether the accessories are suitable for your vehicle.
• 🚘【Application】Engine Coolant Thermostat W/Housing Assembly: Compatible with BMW E84 F10 F22 F30 F33 228i 320i 328i 428i 528i X1 X3 X4 X5 Z4 N20 2.0L & more.Please see the below for full vehicle list.
• 🚘【High-Quality Materials】Use high-quality materials, improve performance, improve durability and tolerances. stable characteristics, high reliability, better help you repair leaking thermostat housings, and correct engine overheating caused by thermostat failure
• 🚘【Thermostat Features】Thermostat housing can reduce enginer wear, deposits and emissions by adjusting the amount of coolant into the radiator until the engine works in a suitable temperature.
• 🚘【Warranty】12-Months-Warranty from the date of purchase.Carefully read the list and make sure the part is compatible. If you are not sure, please contact us. We will answer you within 24 hours.

Product Description

Application:

Compatible with BMW E60 2006-2007 525Xi Compatible with BMW E60 2006-2007 525i N52 Compatible with BMW E60 2008-2008 528Xi Compatible with BMW E60 2009-2009 528i xDrive Compatible with BMW E60 2008-2009 528i Compatible with BMW E60 2006-2007 530xi Compatible with BMW E60 2006-2007 530i N52 Compatible with BMW E60 2008-2008 535xi Compatible with BMW E60 2009-2009 535i xDrive Compatible with BMW E60 2008-2009 535i Compatible with BMW E61 2006-2007 530XiT Compatible with BMW E61 2008-2009 535xiT Compatible with BMW E61 2009-2010 535i xDrive Wagon Compatible with BMW E82 2008-2009 128i Compatible with BMW E82 2008-2010 135i thru '10 Compatible with BMW E83 2007-2008 X3 3.0Si Compatible with BMW E83 2009-2009 X3 x.Drive30i Compatible with BMW E85 2006-2008 Z4 3.0i N52 Compatible with BMW E85 2006-2008 Z4 3.0si Compatible with BMW E86 2006-2008 Z4 3.0si Coupe Compatible with BMW E88 2008-2009 128i Conv Compatible with BMW E88 2008-2010 135i Conv thru '10

Compatible with BMW E89 2009-2010 Z4 sDrive30i

Compatible with BMW E89 2009-2010 Z4 sDrive35i

Compatible with BMW E90 2006-2007 325Xi Compatible with BMW E90 2006-2007 325i Compatible with BMW E90 2007-2008 328Xi Compatible with BMW E90 2009-2011 328i xDrive Compatible with BMW E90 2007-2011 328i Compatible with BMW E90 2006-2007 330xi Compatible with BMW E90 2006-2007 330i

Compatible with BMW E90 2007-2008 335Xi Compatible with BMW E90 2009-2010 335i xDrive thru '10 Compatible with BMW E90 2007-2010 335i thru '10

Compatible with BMW E91 2006-2007 325XiT Compatible with BMW E91 2009-2011 328i xDrive Wagon Compatible with BMW E91 2007-2008 328iT Compatible with BMW E92 2007-2008 328xi Coupe Compatible with BMW E92 2009-2011 328i xDrive Coupe

Fitment Information：

1、 Inspection before installation

Before installation, gently move the impeller by hand and rotate it for more than three times.

Check the harness plug for aging and poor contact. If the on-board harness plug needs to be replaced, please use the plug that meets the technical specifications of the original vehicle, and do not change the original harness definition

Note: The water pump cannot be dry friction, and it must not be powered on for dry operation without cooling and lubrication.

2、 Inspection after installation

Check whether there is coolant leakage at the interface.

Confirm that the plug buckle has been fastened.

Check whether the battery voltage is low.

Clear the fault code, run the engine for 15-20 minutes and observe whether the coolant temperature is normal and whether there is a high temperature alarm.

If the fault code "electronic water pump missing/missing" is reported during the initial installation, check the harness and plug for damage or poor contact.

Product information